FEKAFOS 280 Double

Product description

   Tanks for domestic waste water arriving from drainage systems of various types or storm drains, for systems located below the sewer network such as garages or basements, when the sewers cannot be reached     by gravity. The pump installed in the tank allows the waters to be conveyed into the sewer. The tank has numerous possibilities for connecting pipes at input, output and ventilation, allowing adequate use even     in limited spaces.
   A grinder pump can also be installed in the tank, able to break up any foreign bodies in the waste water and project them at long distances.
   The FEKAFOS is designed for use with two (double models) non-automatic singlephase or threephase pumps without float switch, which must be ordered separately together with the control panel.

   COMPONENTS INCLUDED:
   o 2A lifting devices DSD2" and anti-rotation bracket for FEKA VS e VX
   o 6 Cable glands for double pump and floats
   o 2 Floating cable clamp kits FEKA VS e VX
   o 3 floating and floating alarm support
   Operating range: from 1 to 36 m³/h with a head of up to 25 mt.
   Pumped liquid: ground water, rain water, clear waste water, black waste water and water from rivers and lakes.
   Maximum liquid temperature range: 45°C
   Installation: Inside or outside the building. Laid on the floor, under the ground or housed.
   Materials : LLDPE

   DRENAG FX 15.22 T-NA 400 50 Hz FEKAFOS 280 2" DOUBLE

   Submersible pump for the draining clear water, groundwater or rainwater in commercial building service; the pumps is suitable for applications requiring with high head. The pump is certified according to EN         12050-2 waste water regulation. Suitable for fixed installations with coupling device or mobile if placed directly on the bottom of the tank. The reduced dimensions and the outlet connection both flanged and       threaded make it ideal for replacements. Designed for fast maintenance thanks to a construction solution that provides easy access to the main components of the pump. Open impeller and anti-wear rubber           disc  for use even in the presence of abrasive particles. Double mechanical seal in silicon carbide completely protected in an oil chamber and not in contact with the pumped liquid. Motor shaft in stainless steel     AISI 431 for P2 <1,2 kW and AISI 304 for P2> 1,5 kW, resin cable gland with quick coupling. Single-phase versions with integrated capacitor, available with float for automatic operation (MA) with powers up to       1,5 kW. In the three-phase versions the protection is the responsibility of the user. ATEX version available for use in potentially explosive environments (ATES certifications: II2G Ex db k IIB T4 or IEC EX: Ex db         IIB  T4 Gb).

   Flow rate maximum: 30,9 m3/h
   Head up to: 32 m
   Immersion dept (maximum): 20 m
   Type of pumped liquid: clear water, rainwater and sandy water from construction site
   Free passage:
   Supported liquid temperature (maximum and minimum):
   +50°C (+60°C for a short period of time)
   +40°C for the ATEX version
   Outlet connection: 1" 1/2, DN 32, DN 40
   Start time (maximum) per hour: 20/h
   Class of protection: IP 68
   Motor insulation class: F
   Single phase power input: 1x 220-240V 50Hz
   Three phase power input: 3x 400V 50Hz / 3x 230V 50Hz only on request
   Dry run time: 10 min
   Power cable (m) and plug: 10 m (other length on request)
   Possible type of installation: Mobile if on the floor, fixed on the coupling
   Certification: ATEX
   Special versions on request: Different cable length, different voltage