FEKABOX 110 sūknetavas tvertne bez sūkņa

Product description

   Automatic collection and lifting station for one pump, for waste water or rainwater in semi-basement rooms located below the level of the sewer system in residential building service.
   It consist of a 110 liter polyethylene tank (eco-friendly because 100% recyclable). Cover complete with gasket.
   It may contain liquids compatible with the EN 12050-2 standard. The station is designed for the use of a single automatic single-phase pump with float which must be ordered separately (without the control         panel).
   The pump installation kit, the cable gland for a single pump and the 2 "F x 1 x 1/4 M fitting for the installation of a Feka 600 are included.
   The tank can be installed inside or outside a building, fixed to the floor and buried. It is not walkable or suitable for the passage of vehicles.

   Type of pumped liquid: Waste water, sewage water
   Liquid temperature: From 0°C to +50°C
   Tank capacity and type of material: 110-liter in polyethylene
   Possible type of installation: The tank can be installed inside or outside a building, fixed to the floor and buried. It is not walkable or suitable for the passage of vehicles.

   FEKA VS 750 M - A 50 Hz 230 FEKABOX 110

   Submersible centrifugal pump with liquid vortex cast steel impeller, suitable for pumping sewer water and waste water in general containing solids up to a maximum size of 50 mm.
   Handle with insulating rubber cover. AISI 316 stainless steel drive shaft. Double mechanical seal with
   intermediate oil chamber (atoxic oil), in carbon/alumina on the motor side and silicon carbide/silicon carbide on the pump side.
   Stainless steel pump casing, seal cover, motor casing.
   Dry, asynchronous, sealed and cooled by the pumped liquid. Rotor mounted on greased for-life ball bearings, oversized and selected to guarantee greater noise reduction and duration. Thermo-amperometric           protection as standard for single-phase version, and the user’s responsibility for the three-phase version. Constantly active capacitor on the single-phase version.
   Construction in accordance with the IEC 2-3 IEC 61-69 (EN 60335-2-41) standards.

   - Motor protection class: IP 68.
   - Insulation class: F.
   - Continual running with liquid at 35 °C and pump completely submersible.
    The single-phase version can be supplied with float for automatic function.
  - Power supply cable: 10 mt of H07RN-F cable with Schuko plug for the single-phase version and 10 meters of H07RN-F cable for the three-phase version.
  - Operating range: from 0 to 32 m3/h with head up to 14 mt.
  - Pumped liquid: sewer water and waste water in general and non aggressive.
  - Liquid temperature range: from 0°C to +35°C for household use (EN 60335-2-41),
    from 0°C to +50°C for other uses.
  - Maximum ambient temperature for pump running with submersible motor: +40°C.
  - Maximum immersion depth: 7 mt.
  - Installation: fixed or portable, vertical.
  - Free Passage: 50 mm